|
Cylinder-Type Series
 |
Model # |
Media Diameter |
Filtration Area |
Liquid Volume |
4T |
47 mm |
17 cm2 |
250 ml |
10 T |
105 mm |
86.5 cm2 |
1350 ml |
21 T |
140 mm |
153.9 cm2 |
3750 ml |
43 T |
200 mm |
314 cm2 |
8000 ml |
50P |
88 mm |
50 cm2 |
270 ml |
|
 Materials of Construction
- 316 Stainless Steel Head and Base Plates with Pyrex or Stainless Steel cylinder and Neoprene seals
- Protective web surrounding cylinder
Available Options
- 316L Stainless Steel
- Stainless Steel cylinder
- Jacketed Stainless Steel cylinder for heating or cooling
- O-Ring seal design
Operation
- Pressure, Gravity, or Vacuum
- Units with Pyrex cylinders can be operated up to 30 PSI
- Units with Stainless Steel cylinders can be operated up to 50 PSI
- Inlet and outlet fittings are Slip On Hose Nipple or Tri-Clamp Fittings
- 0-60 PSI pressure gauge included
Tech Sheets:
4T Lab Filter Tech Sheet
10T Lab Filter Tech Sheet
21T Lab Filter Tech Sheet
43T Lab Filter Tech Sheet
50P Lab Filter Tech Sheet
Visit the ErtelAlsop Online Store to Buy Online
Back to Top
The AccuScale™ Series
| AccuScale™ Series Plate and Frame Filter Presses |
| |
1S |
4S |
8S |
Model E1 |
| Plate Dimension |
1" square |
4" square |
8" square |
10" diameter |
| Ports |
1 |
4 internal |
4 internal |
1 |
| Area/Filter Sheet |
5.08 cm |
0.0078 m² |
0.029 m² |
419 cm² |
| Cake Volume/9.5mm inlet |
0.061 liters |
0.067 liters |
0.25
liters |
NA |
| Cake Volume/25mm inlet |
0.161 liters |
0.182 liters |
0.68 liters |
NA |
| Cake Volume/37.5mm inlet |
n/a |
0.273
liters |
1.02
liters |
NA |
| Cake Volume/50mm inlet |
n/a |
0.364 liters |
1.36 liters |
NA |
| Standard Height |
0.241 meters |
0.25 meters |
0.35 meters |
0.30 meters |
| Standard Width |
0.0889 meters |
0.20 meters |
0.30 meters |
0.35 meters |
| Range of Length |
0.127 meters |
0.25-0.50
meters |
0.4-1.25
meters |
0.30 meters |
 1S
The
new ErtelAlsop AccuScale™ 1S filter is a major advancement
in laboratory and scaleup filtration with the introduction of a
1-inch square plate and frame filter press with heating/cooling
capabilities. The PharmaScale™ 1S filteris constructed of 316L stainless
steel with an O-ring gasket to prevent leakage. All of ErtelAlsop's
proprietary filter media are compatible with the new 1S design.
Back to Top
4S & 8S
This series
of filters is designed for the laboratory, new product and process
development, testing, scaleup and small volume production of products.
Pad change-over can be accomplished easily and in a minimum of time.
Even more versatility can result from the use of dividing heads
to provide double or even triple serial filtration in a single pass.
Back to Top
E-1
The Model E-1 is recommended for 20 to 40 liter batch sizes. Optional pumps and motors are available. As with other ErtelAlsop plate and frame filter presses, the Model E-1 can be fitted with an inlet head to permit retention of filter cake.
The Diamond Series™
ErtelAlsop’s Diamond Series™ filter press combines the latest weld-free construction technology with the most revolutionary plate and frame design concept in recent history. The Diamond Series provides complete drainage and venting while maintaining our superior internally ported design.
Available in 4-inch (as shown), 8-inch, or 12-inch designs, these internally ported filters provide the ultimate in flexibility. Eyelet gaskets commonly used in externally ported filter presses, present concerns with regard to
cross-contamination and chemical compatibility, as well
as limitations on the thickness of filter media used.
Diamond Series filter presses eliminate the need for gaskets
entirely.
 The Diamond Series, in conjunction with ErtelAlsop's patented BioClean™ plate technology, allows for effective cleaning and sterilization of every liquid contact surface. Our standard Validation Package, along with optional 20 Ra surface finish makes this the easiest filter in the world to validate.
When choosing a Diamond filter press you should remember the 7Cs:
• Completely Drainable
• Cleanable
• Cost Effective
• Cutting Edge
• CGMP
• Compliant
• Consistent
View Online Literature
Back to Top
|
